Prepare the developer
For a Rolfilm 120 you need 30ml of development solution. The dilution is 1+9 (eg. 270 ml water + 30 ml) for around 20°C.
Develop the film
Pour the solution into the developing tank. Then agitate for the first minute, tap the tank on the table 3 or 4 times to remove the air bubbles from the surface of the film and let it sit for 45 minutes. After that empty the tank and get rid of the developer as it is a one time use.
Stop the development
Put the stop bath into the tank and agitate for 1 minute. Use Ilfostop from Ilford instead of water for better results. The stop bath can be reused.
Fix the film
Put the fixer into the tank for 3 minutes, agitate 10 seconds at beginning of every minute. Use Ilford Rapid Fixer. The fixer can be reused.
Wash and dry the film
Open the tank and wash it with clear water to remove all chemicals. Let the water run for 5 minutes to completely clean it. Then open the tank and pull out the reel. Remove the film from the reel and let it dry hanging.
comments powered by Disqus